¢ñ. Substation Hardwares:
£¨4£©Call indicator light
¢ò. Technical Parameters:
Output power of substation: 350mW
Substation dimension: 130x110x40mm(LxWxH)
Communication distance: 80m(0.2mm2); 200m(0.5mm2); 300m(0.75mm2);
¢ó. Installation Operation:
The connecting method is as follows:
1. After the connecting installation as the connecting method shown
in the figure successfully, press the power switch of master
station, the power indictor light will be on which means the normal
state of the power.
2. Call from substation to master station and enter the intercom:
If there is an alarm from any substation to the master station
(press Alarm key of substation), the corresponding substation
indictor light in the master station will blink and keep in red, and
there will be music alarm with the master station. The music will
not stop till you press the corresponding switch of the substation
in the master station, and the indicator light will turn to green.
At the time, the intercom between master station and substation is
available (press Intercom key in master station to enter the talk
and release the key to listen to the talk in substation). If there
are other alarms from substations to the master station, the
corresponding indicator light of substation is master station will
blink in red without music alarm, the indicator light of substation
will turn to green when you press the corresponding switch of
substation in master station.
3. The substation is installed in wall-mounted way.